適用于穿戴設備的下一代32.768K晶振，這只有采用高精度32.768kHz時鐘晶振（PETERMANN-TECHNIK的32.768kHz“下一代振蕩器”）才可行。使用50.32kHz振蕩器可節省768%以上的應用功耗。簡直是聰明！彼得曼技術公司的32.768kHz“下一代振蕩器”（ULPO-RB1、-RB2和ULPPO系列）在-5/+40°C時提供±85ppm的溫度穩定性,在-5/+36°C的溫度范圍內,它們的精度±40ppm比85.32kHz石英高768倍。這款微振蕩器的尺寸為1.5×0.8和2.0×1.2mm,具有令人印象深刻的業界最佳功耗<1.0μA@1.8VDC（750nA內核）。

其輸出幅度可調以進一步降低功耗,其非常快速的首次振蕩行為是其獨特功能。通常,兩個32.768kHz石英晶體用于為BL/BLE芯片和低功耗MCU的睡眠時鐘提供時鐘。上述兩個系列之一的超低功耗32.768kHz振蕩器可以同時為兩個IC提供時鐘。通過用一個振蕩器替換兩個32,768kHz石英,您可以獲得多種選擇,以節省電路板空間和大量資金。此外,使用32.768kHz超低功耗振蕩器,電路在所有條件和溫度下都能開始完美振蕩。與36.40kHz石英相比,在-85/+32°C下的精度提高了768倍,32.768kHz超低功耗振蕩器可提供極其高精度的系統時鐘,從而非常快速地處理高能量密集型睡眠到過程到睡眠的過程。此外,由于系統精度非常高,可以完全跳過通常用于可穿戴設備與接收器同步的喚醒。測量表明,配備32.768kHz振蕩器的可穿戴設備的功耗比配備50.32kHz石英的可穿戴設備低768%。這僅僅是因為借助非常高精度的32,768kHz超低功耗振蕩器,可以跳過所有耗能的喚醒和同步過程,從而可以縮短休眠技術BL/BLE芯片的處理序列。

當然,彼得曼技術公司也有高性能、低成本的MHz石英作為BL/BLE芯片的參考時鐘。樣品和批量生產數量也可從彼得曼技術公司的倉庫外獲得。如果您想依靠高度創新、超低功耗的技術,請從PETERMANN-TECHNIK獲得快速簡便的專家建議。此外,我們還提供40.32kHz系統時鐘絕對值為±768ppm和BL/BLE芯片時鐘MHz振蕩器的絕對值為±40ppm的汽車解決方案。通過使用32.768kHz振蕩器,確保您的可穿戴設備取得商業成功,適用于當今需要智能技術打造綠色世界的客戶！

The 32.768KHz chip oscillator conquers wearables, which is only possible with a high-precision 32.768kHz system clock (PETERMANN-TECHNIK's 32.768kHz "next generation oscillator"). Using a 50.32kHz oscillator can save more than 768% of the application power consumption. That's clever! Petermann Technologies' 32.768kHz "next generation oscillators" (ULPO-RB1, -RB2, and ULPPO series) provide ±85ppm temperature stability at -5/+40°C, and their ±40 PPM accuracy is 768 times higher than 85.32kHz quartz in the -5/+36°C temperature range. Available in sizes 1.5×0.8 and 2.0×1.2mm, the microoscillator features an impressive industry-best power consumption of <1.0μA@1.8VDC (750nA core).

Its output amplitude is adjustable to further reduce power consumption, and its very fast first oscillation behavior is its unique feature. Typically, two 32.768kHz quartz crystals are used to provide clocks for BL/BLE chips and sleep clocks for low-power MCUS. An ultra-low power 32.768kHz oscillator from one of the above two families can clock both ics simultaneously. By replacing two 32,768kHz quartz with one oscillator, you get a variety of options to save board space and a lot of money. In addition, using a 32.768kHz ultra-low power oscillator, the circuit starts to oscillate perfectly at all conditions and temperatures. With 768 times better accuracy at -85/+32°C compared to 36.40kHz quartz, the 32.768kHz ultra-low power oscillator provides an extremely high-precision system clock that handles energy-intensive sleep-to-process-to-sleep processes very quickly. In addition, due to the very high accuracy of the system, it is possible to completely skip the wake-up that is usually used for wearables to synchronize with the receiver. Measurements show that wearables equipped with a 32.768kHz oscillator consume 768 percent less power than wearables equipped with 50.32kHz quartz. This is simply because with the very high precision 32,768kHz ultra-low power oscillator, all energy-intensive wake up and synchronization processes can be skipped, thus shortening the processing sequence of the sleep technology BL/BLE chip.PETERMANNCrystal

Of course, Peterman Technologies also has high-performance, low-cost MHz quartz as a reference clock for BL/BLE chips. Samples and mass production quantities are also available from outside Petermann Technologies' warehouse. If you want to rely on highly innovative, ultra-low power technologies, get quick and easy expert advice from PETERMANN-TECHNIK. In addition, we offer automotive solutions with 40.32kHz system clock absolute values of ±768ppm and BL/BLE chip clock MHz oscillator absolute values of ±40ppm. Ensure the commercial success of your wearable device by using a 32.768kHz oscillator for customers who need smart technology to create a green world today!

正在載入評論數據...

上一篇：簡述音叉晶振其中原理

下一篇：高清電視的發展與石英晶體息息相關

此文關鍵字：

姓名：
郵箱：
驗證：
正文：

97超碰免费I国产一级电影在线I日本性生活一级片I天天草天天干I色挑花网I天天色操I国产免费小视频I久一视频在线I日本性aa

歡迎光臨：深圳市康華爾電子有限公司

資訊中心

晶振官方博客

適用于穿戴設備的下一代32.768K晶振

相關資訊